Venison Sausage

How much pork to add to deer meat?

For venison sausage, add pork to reach about 20–30% fat: roughly 1 lb fatback per 3–4 lb deer meat. Ratios for pork butt, belly and bacon explained.

On this page
  1. The short answer
  2. Why venison needs added fat
  3. How to work out your fat percentage
  4. Venison-to-pork ratios by cut
  5. Recommended fat levels by product
  6. Choosing your pork
  7. Why not use deer fat?
  8. Mixing tips

The short answer

For venison sausage, add enough pork to bring the finished mix to about 20–30% fat. With pork fatback (nearly pure fat), that means roughly 1 lb of fat for every 3–4 lb of venison, a 75/25 to 80/20 blend. With pork shoulder (pork butt), which is only partly fat, even a 50/50 blend comes out at only around 15% fat. That’s fine for a lean sausage, but for juicier links, add some fatback as well.

For burgers, less is enough: about 10–20% fat.

Why venison needs added fat

Well-trimmed venison is very lean, typically only a few percent fat. Fat is what makes sausage juicy and tender and carries flavor. Without it, venison sausage turns out dry and crumbly. Most people also trim off deer fat (see below), so the fat has to come from somewhere else, and pork is the most common choice because it tastes mild and stays soft at eating temperature.

How to work out your fat percentage

You don’t need exact lab numbers. A quick estimate works:

Fat % = (venison weight × venison fat % + pork weight × pork fat %) ÷ total weight

Example: 4 lb venison at about 3% fat plus 1 lb fatback at about 85% fat:

(4 × 0.03 + 1 × 0.85) ÷ 5 = 0.97 ÷ 5 ≈ 19% fat

Do the same calculation with pork butt at about 25% fat and you’ll see why it takes so much more pork to get the same result.

Venison-to-pork ratios by cut

The figures below are estimates for a 5-lb batch. They assume trimmed venison at about 3% fat, fatback at about 85%, pork belly at about 50% and pork butt at about 25%. Real cuts vary, so treat these as ballpark numbers.

Pork used Venison : pork Pounds (5-lb batch) Estimated fat
Fatback 80 : 20 4 lb venison + 1 lb fatback ~19%
Fatback 75 : 25 3¾ lb + 1¼ lb ~24%
Fatback 70 : 30 3½ lb + 1½ lb ~28%
Pork belly 60 : 40 3 lb + 2 lb ~22%
Pork belly 50 : 50 2½ lb + 2½ lb ~27%
Pork butt 50 : 50 2½ lb + 2½ lb ~14%
Pork butt 40 : 60 2 lb + 3 lb ~16%
Butt + fatback 60 : 20 : 20 3 lb venison + 1 lb butt + 1 lb fatback ~24%

The last row is a good all-around blend. The shoulder adds pork flavor and meaty texture, and the fatback brings the fat up to a juicy level.

Product Target total fat Easy fatback ratio
Burgers 10–20% 85/15 to 80/20
Fresh link sausage (Italian, brats) 20–30% 75/25
Breakfast sausage 25–30% 75/25 to 70/30
Summer sausage ~20% 80/20
Snack sticks ~15–25% 80/20
Chili or taco meat 0–10% Often no added fat; cook it with oil

Smoked products like venison summer sausage and venison snack sticks are often made a little leaner, because a very high fat content can render out during the long smoke and leave greasy, wrinkled casings. Venison breakfast sausage tastes best at the richer end.

Choosing your pork

Pork fatback

Fatback is the hard fat from the pig’s back. It’s the cleanest choice: mostly fat, neutral in flavor, and firm enough to grind cleanly when it’s cold. It lets you control the ratio precisely and keeps the venison flavor in front. Butchers often sell it cheaply, but you may need to ask ahead.

Pork shoulder (butt)

Pork shoulder is easy to find and adds pork flavor along with fat. Because it’s mostly lean meat, you need a lot of it. A 50/50 blend tastes noticeably porky and still comes out on the lean side. Fat content varies a lot between shoulders, so pick well-marbled pieces and keep the fat cap on.

Pork belly

Belly is about half fat and half meat, and it adds richness. Some people find it can overpower venison’s flavor, but it works well in bold-flavored sausages. Use the uncured, unsmoked kind.

Bacon

Bacon adds smoky flavor and fat, but it’s already salted and cured. If you use it, cut back the salt in your seasoning and fry a test patty before you commit to the batch. Its flavor also comes through in everything, so it suits some styles better than others.

Alternatives: beef fat

Beef fat (beef trimmings or suet) is common in some regions, especially for summer sausage. It has a beefier flavor and is firmer at eating temperature than pork fat, so it can feel slightly waxy in fresh links that you eat hot. It’s a reasonable choice for people who avoid pork.

Why not use deer fat?

Most sausage makers trim deer fat off. It’s hard and waxy at room temperature, coats the mouth, and carries much of the strong “gamey” flavor people dislike. It also tends to go rancid faster in the freezer. Some hunters do keep a little, but pork fat is the safer bet for good results.

Mixing tips

  • Weigh everything. Ratios only mean something if you measure by weight.
  • Partially freeze both meats. Cube the venison and pork and chill them until they’re firm at the edges, so the fat cuts cleanly instead of smearing.
  • Toss before grinding. Mix the venison and pork cubes together before they go through the grinder, so every bit of ground meat gets some of each.
  • Trim the venison well. Remove silver skin, sinew and bloodshot meat first.
  • Cook pork blends thoroughly. Fresh sausage containing pork should reach 160°F (71°C) inside.

For the whole process from trimming to stuffing, see how to make venison sausage. Once your ratio is set, you can pick a flavor from our homemade deer sausage seasoning blends.

The complete guide to venison sausage

How to Make Venison Sausage
Read the guide

Keep exploring

Guides from other topics

All topics →